About this article
Class D mono power amplifier
- Maximum power 2000W
- Variable low pass filter
- Infrasonic Filter
- speaker level input
- Bass boost
FEATURES
AMPLIFIER TYPE
- Amplifier Type: Class D
CEA-2006 PRIMARY NOTATION
- Output Power: 500 Watts RMS x 1 at 4 Ohms and 1% THD + N
- Signal to noise ratio: 76dBA (reference: 1Watt into 4Ohms)
MAXIMUM POWER
- Maximum power: 2000W
OUTPUT POWER
- Nominal power at 14.4 V:
- 500 Watts RMS x [ch] (4 Ohms, 20-200Hz, 1.0% THD)
- 1000 Watt RMS x [ch] (2 Ohms, 100Hz, 1% THD)
FEATURES
- Signal to noise ratio: 100 dB (Reference: nominal power into 4 Ohms at 14.4 V)
- Frequency response: 20Hz-200Hz (+0dB, -3dB) Class D
- Input impedance: 10k ohm
- Speaker impedance: 4 (2 to 8 allowed)
AUDIO SECTION
- Low Pass Filter: Built-in variable low pass filter (50Hz-200Hz, -24dB/oct)
- Infrasonic Filter: Built-in variable Infrasonic filter (20Hz-50Hz, -24dB/oct)
- Bass Boost: Built-in bass boost control (40Hz, 0 dB - + 18 dB)
- RCA Input Sensitivity: 0.2 [V] - 5.0 [V]
- Speaker level input sensitivity: 4.0 [V] - 12.0 [V]
TERMINALS
- Battery and ground: Screw terminal (Ni) (M6)
- Speaker output: Screw terminal (Ni) (M4)
- Line Input: RCA (Ni)
- Line output: RCA (Ni)
- Speaker Input: JST connector
GENERAL
- Dimensions (WxHxD): 335 [mm] x 56 [mm] x 192 [mm] 13-3/16 in. x 2-3/16 in. x 7-9/16 in.
- Weight (kg): 2.8 [kg] 6.2 [lb]
- Operating voltage: 14.4 V (11-16 V permissible [V]
- Current consumption: 65 [A]
MAIN FEATURES
- CEA-2006 compliant
- Class D
- 2 ohm load capacity
- Speaker Level Input
- Enabling signal detection
- Terminal cover
- MOS-FET switching power supply
- Cast aluminum heat sink
- Line output terminals for extension
OTHERS
- Triangle indicator
Class D mono power amplifier
- Maximum power 2000W
- Variable low pass filter
- Infrasonic Filter
- speaker level input
- Bass boost
FEATURES
AMPLIFIER TYPE
- Amplifier Type: Class D
CEA-2006 PRIMARY NOTATION
- Output Power: 500 Watts RMS x 1 at 4 Ohms and 1% THD + N
- Signal to noise ratio: 76dBA (reference: 1Watt into 4Ohms)
MAXIMUM POWER
- Maximum power: 2000W
OUTPUT POWER
- Nominal power at 14.4 V:
- 500 Watts RMS x [ch] (4 Ohms, 20-200Hz, 1.0% THD)
- 1000 Watt RMS x [ch] (2 Ohms, 100Hz, 1% THD)
FEATURES
- Signal to noise ratio: 100 dB (Reference: nominal power into 4 Ohms at 14.4 V)
- Frequency response: 20Hz-200Hz (+0dB, -3dB) Class D
- Input impedance: 10k ohm
- Speaker impedance: 4 (2 to 8 allowed)
AUDIO SECTION
- Low Pass Filter: Built-in variable low pass filter (50Hz-200Hz, -24dB/oct)
- Infrasonic Filter: Built-in variable Infrasonic filter (20Hz-50Hz, -24dB/oct)
- Bass Boost: Built-in bass boost control (40Hz, 0 dB - + 18 dB)
- RCA Input Sensitivity: 0.2 [V] - 5.0 [V]
- Speaker level input sensitivity: 4.0 [V] - 12.0 [V]
TERMINALS
- Battery and ground: Screw terminal (Ni) (M6)
- Speaker output: Screw terminal (Ni) (M4)
- Line Input: RCA (Ni)
- Line output: RCA (Ni)
- Speaker Input: JST connector
GENERAL
- Dimensions (WxHxD): 335 [mm] x 56 [mm] x 192 [mm] 13-3/16 in. x 2-3/16 in. x 7-9/16 in.
- Weight (kg): 2.8 [kg] 6.2 [lb]
- Operating voltage: 14.4 V (11-16 V permissible [V]
- Current consumption: 65 [A]
MAIN FEATURES
- CEA-2006 compliant
- Class D
- 2 ohm load capacity
- Speaker Level Input
- Enabling signal detection
- Terminal cover
- MOS-FET switching power supply
- Cast aluminum heat sink
- Line output terminals for extension
OTHERS
- Triangle indicator
Kenwood KAC-9106D Powerful Mono Class D Car Amplifier, Black
- Regular price
- $399.97
- Sale price
- $399.97
- Regular price
-
$479.99
item: 46-KAC-9106D
Couldn't load pickup availability
Similar articles that may interest you
Based on what customers buy
Returns and Refunds
RETURNS AND REFUNDS POLICY
All our products are guaranteed against manufacturing defects and damage during delivery. In this case, the products are replaced by equivalent products. It is the buyer's responsibility to validate the compatibility of the products purchased. In the event that you need to return an item(s) to us, contact us first to obtain the method to use. Maximum 30 days following the date of sale for any product return and you must obtain a return authorization before returning a product to us... contact us to do so. NO RETURNS FOR USED OR CLEARANCE ITEMS... these items are considered final sales.
