Kingston IronKeyT Keypad 200 is an OS-independent, hardware-encrypted USB flash drive with an alphanumeric keypad for easy-to-use PIN access.
The KP200 features XTS-AES 256-bit hardware encryption. It is also FIPS 140-3 Level 3 (pending) certified for military-grade security with enhancements that further raise the bar for data protection. Its circuitry is coated with a special epoxy layer that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks on semiconductor components. The reader is designed to be tamper-resistant to alert owners. It also features Brute Force password attack protection and BadUSB protection with digitally signed firmware. The alphanumeric keypad is coated with a polymer layer that protects the keys and masks key usage by scanning fingerprints on the keys.
The KP200 uses a built-in rechargeable battery that can first be used to unlock the drive without using any software, and then plug it into any device that supports a USB Type-A mass storage device. This gives users the greatest flexibility across different types of platforms and operating systems.
With the Multi-PIN (Admin/User) option, the keypad can be used to set an alphanumeric PIN that is easy to remember but difficult for the administrator or user to guess. The administrator can restore a user PIN and allow access to the drive if the user PIN is forgotten or the drive is locked after reaching the maximum of 10 user login attempts. When both the admin and user PINs are enabled, the KP200 will lock the user PIN after 10 unsuccessful login attempts; if the admin PIN is entered incorrectly 10 times in a row, the brute force protection will encrypt the drive, destroy the data forever, and reset the drive.
The drive also offers two levels of read-only (or write-protect) modes: a global mode that can be set by the administrator and a session-only mode that can be set by the user. Read-only modes can protect the drive from malware on untrusted systems. Additionally, the administrator can load content and set the Global Read-Only mode, so that the user can access the data without making any changes.
FIPS 140-3 Level 3 Certified (Pending)
The KP200 now meets the new FIPS 140-3 Level 3 military-grade security specifications published by NIST. This is an enhanced version of the FIPS 140-2 specifications that further improves the drive’s security capabilities and tamper resistance. It features 256-bit XTS-AES encryption as well as protection against Brute Force and BadUSB attacks with digitally signed firmware. Its circuitry is covered with a special epoxy layer that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks on semiconductor components.
Operating system and device independent
With the KP200 using a rechargeable battery, the keypad can be used to unlock the drive without using any software and then plug it into any system that supports a USB Type-A mass storage device. This gives users the greatest flexibility across different types of platforms and operating systems.
Multi-PIN option
Users have the option to set up a User or Admin/User mode. Admin can be used to restore a user PIN and provide access to the reader in case the user PIN is forgotten or the reader is locked after reaching the maximum of 10 user login attempts.
Global and session read-only modes (write protection)
The administrator and user can set a session-based read-only mode to protect the drive from malware on untrusted systems. The administrator can also set a Global Read-Only mode that sets the drive to Read-Only mode until reset.
Specifications
Interface: USB 3.2 generation 1
Available capacities: 8 GB, 16 GB, 32 GB, 64 GB, 128 GB
Connector: Type A
Speed:
USB 3.2 Gen 1
8GB - 128GB: 145MB/s read, 115MB/s write
USB 2.0
8GB: 30MB/s read, 12MB/s write
16GB - 128GB: 30MB/s read, 20MB/s write
Dimensions (with socket): 80 mm x 20 mm x 10.5 mm
Dimensions (without socket): 78 mm x 18 mm x 8 mm
Waterproof/Dustproof: Certified to IP57 rating
Operating temperature: 0°C to 50°C
Storage temperature: -20°C to 60°C
Compatibility: USB 3.0/USB 3.1/USB 3.2 Gen 1
Minimum System Requirements: USB 3.0 compatible and 2.0 compatible
Compatible with: OS independent: Microsoft Windows®, macOS®, Linux®, Chrome OST, AndroidT 4 or any system that supports USB mass storage device.
Kingston IronKeyT Keypad 200 is an OS-independent, hardware-encrypted USB flash drive with an alphanumeric keypad for easy-to-use PIN access.
The KP200 features XTS-AES 256-bit hardware encryption. It is also FIPS 140-3 Level 3 (pending) certified for military-grade security with enhancements that further raise the bar for data protection. Its circuitry is coated with a special epoxy layer that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks on semiconductor components. The reader is designed to be tamper-resistant to alert owners. It also features Brute Force password attack protection and BadUSB protection with digitally signed firmware. The alphanumeric keypad is coated with a polymer layer that protects the keys and masks key usage by scanning fingerprints on the keys.
The KP200 uses a built-in rechargeable battery that can first be used to unlock the drive without using any software, and then plug it into any device that supports a USB Type-A mass storage device. This gives users the greatest flexibility across different types of platforms and operating systems.
With the Multi-PIN (Admin/User) option, the keypad can be used to set an alphanumeric PIN that is easy to remember but difficult for the administrator or user to guess. The administrator can restore a user PIN and allow access to the drive if the user PIN is forgotten or the drive is locked after reaching the maximum of 10 user login attempts. When both the admin and user PINs are enabled, the KP200 will lock the user PIN after 10 unsuccessful login attempts; if the admin PIN is entered incorrectly 10 times in a row, the brute force protection will encrypt the drive, destroy the data forever, and reset the drive.
The drive also offers two levels of read-only (or write-protect) modes: a global mode that can be set by the administrator and a session-only mode that can be set by the user. Read-only modes can protect the drive from malware on untrusted systems. Additionally, the administrator can load content and set the Global Read-Only mode, so that the user can access the data without making any changes.
FIPS 140-3 Level 3 Certified (Pending)
The KP200 now meets the new FIPS 140-3 Level 3 military-grade security specifications published by NIST. This is an enhanced version of the FIPS 140-2 specifications that further improves the drive’s security capabilities and tamper resistance. It features 256-bit XTS-AES encryption as well as protection against Brute Force and BadUSB attacks with digitally signed firmware. Its circuitry is covered with a special epoxy layer that makes it virtually impossible to remove components without damaging them; this tough epoxy stops attacks on semiconductor components.
Operating system and device independent
With the KP200 using a rechargeable battery, the keypad can be used to unlock the drive without using any software and then plug it into any system that supports a USB Type-A mass storage device. This gives users the greatest flexibility across different types of platforms and operating systems.
Multi-PIN option
Users have the option to set up a User or Admin/User mode. Admin can be used to restore a user PIN and provide access to the reader in case the user PIN is forgotten or the reader is locked after reaching the maximum of 10 user login attempts.
Global and session read-only modes (write protection)
The administrator and user can set a session-based read-only mode to protect the drive from malware on untrusted systems. The administrator can also set a Global Read-Only mode that sets the drive to Read-Only mode until reset.
Specifications
Interface: USB 3.2 generation 1
Available capacities: 8 GB, 16 GB, 32 GB, 64 GB, 128 GB
Connector: Type A
Speed:
USB 3.2 Gen 1
8GB - 128GB: 145MB/s read, 115MB/s write
USB 2.0
8GB: 30MB/s read, 12MB/s write
16GB - 128GB: 30MB/s read, 20MB/s write
Dimensions (with socket): 80 mm x 20 mm x 10.5 mm
Dimensions (without socket): 78 mm x 18 mm x 8 mm
Waterproof/Dustproof: Certified to IP57 rating
Operating temperature: 0°C to 50°C
Storage temperature: -20°C to 60°C
Compatibility: USB 3.0/USB 3.1/USB 3.2 Gen 1
Minimum System Requirements: USB 3.0 compatible and 2.0 compatible
Compatible with: OS independent: Microsoft Windows®, macOS®, Linux®, Chrome OST, AndroidT 4 or any system that supports USB mass storage device.
Kingston Technology - IronKey Keypad 200 Encrypted USB Flash Drive, USB 3.2 GEN 1, 128GB Capacity
- Regular price
- $516.97
- Sale price
- $516.97
- Regular price
-
$619.99
item: 78-140221
Couldn't load pickup availability
Based on what customers buy
RETURNS AND REFUNDS POLICY
All our products are guaranteed against manufacturing defects and damage during delivery. In this case, the products are replaced by equivalent products. It is the buyer's responsibility to validate the compatibility of the products purchased. In the event that you need to return an item(s) to us, contact us first to obtain the method to use. Maximum 30 days following the date of sale for any product return and you must obtain a return authorization before returning a product to us... contact us to do so. NO RETURNS FOR USED OR CLEARANCE ITEMS... these items are considered final sales.
